Oil Spill Blog

Oil spills are one of the most well-known sources of contamination. They are very hazardous to the environment and to the living organisms, such as plants and animals. Oil spilled or dumped in junkyards is a very serious issue. A Junkyard is a place that is used to store junk, wrecked and abandoned automobiles, trucks, and buses. Motor oils, automobile fluids, and other solid wastes from these junks are dumped into the yard. These oil spills can carry heavy metals and other toxic wastes that are considered to have deleterious effect on nature.

During heavy rain or by surface drains, the toxic chemicals and heavy metals from junkyards seep into the soil making cleaning difficult. Oil spill cleanup procedures are not only tedious but also quite expensive. There are several oil spill cleanup procedures followed by ecologists. They include bioremediation, booms, skimmers, sorbents, chemical dispersants, biological agents, and more.

Of the lot, the most effective and greener way to cleanup the oil spill is bioremediation. A product that makes use of this technology is Oil Gone Easy S-200. It is an eco-friendly oil stain remover that can be used to not only cleanup oil spills on a large scale but also to remove tough oil stains from driveways, garages, and more. Oil Gone Easy Home & Driveway S-200 oil stain remover can be used on different surfaces, such as concrete, flag stone, asphalt, brick, pavers, cobblestone, and soil. This oil stain remover is not only easy to use but also cost effective.

Some Tips in Oil Spill Management:

• In order to prevent oil spills, outdoor storage facilities should have a permanent roof. It prevents precipitation and restricts sunlight entering the storage area.

• Always store degreasers and solvents in a tightly covered container.

• Rags contaminated with paint, solvents, grease, or oil must be sent to a recycling facility.

Popularity: 10% [?]

Ground water is the natural elixir. In the absence of rain water, ground is the only eternal source of water. Due to massive industrialization and other human activities, the ground water resources are under threat. Oil storage systems, chemical tanks, septic tanks, landfills, and crude oil spills are the potential contaminants of ground water. Both the chemical and biological pollutants percolate the ground and mix with the ground water.

Ground water contamination due to crude oil spills have been a persistent problem and less attended to. Over the past years, gallons of fuel oils and motor oil have been spilled on the land and water sources without check. Since ground water is used as potable water in many regions, contamination of it would cause serious health hazards to human beings drinking it. There is less awareness about such contamination among government and non-government agencies.

Bemidji in Minnesota is one well studied crude oil spill site with contaminated ground water. The intensity of ground water poisoning depends greatly on the rate at which the hydrocarbon components disseminate. Natural biodegradation of oil leachates is more complex at the subsurface level due to the absence of oxygen. Crude oil spills should be controlled and the oil contaminated sites should be immediately subject to remedy.

Treatment of contaminated ground water can be done. But oil spill recovery is a tedious process. Purification can be done by pumping the underground water and filtered through the several stages for removal of contaminants. Augmentation of the hydrocarbon degrading microorganisms effectively into the underground water can help in speedy recovery of oil spills.

Oil Gone Easy 200 is an eco-friendly oil spill remover that is used to clean up the oil spills from land and marine waters. This oil spill remover can be sprayed on to the oil spilled site, which provides increased access to bacterial community thus bringing biodegradation of oil spills. Oil Gone Easy is a very good product in dealing home oil spills and drive away oil spills.

Popularity: 11% [?]

Oil spills occur due to leakage from improper oil tanks, offshore drilling, or faulty pipelines. Disorganized transportation of oil is another important factor that leads to oil spills. It is important to act fast to clean up an oil spill and prevent the oil from spreading to a bigger area. When it comes to oil spill cleanup, crude oil and their derivatives are the worst. Traditional oil spill cleanup methods such as incineration, used especially for crude oil spill cleanup, are expensive and are also considered extremely harmful to the environment. So, natural methods of oil spill cleanup are always sought after.

A group of scientists from the Department of Industrial Microbiology at University College, Dublin, conducted a research on the action of certain microbes in tackling with the pollutants in an oil spill. Their research showed the exceptionally diverse nature of these microbes. While some of the constituents of oil proved to be toxic to some of the bacteria, other bacteria were capable of using the oil compounds as food ultimately breaking them down.

According to researchers, simply adding microbes to the spilled oil or the oil stain will not work. Only specific bacteria work upon the oil components to break them down into harmless compounds. Choosing the most applicable bacteria will only help in cleaning up an oil spill. Manipulation and usage of natural microbial populations is necessary to break down the contaminants and bring back the environment to its original form.

Bioremediation has proven to be natural and effective process to gradually destroy the harmful pollutants in oil spills and remove oil stains. It only calls for the use of a specific set of bacteria that will work on any contaminated site. Oil Gone Easy S-200 is one such oil spill cleaner that makes use of the bioremediation technology effectively and cleans not just soil and marine oil spills, but also oil stains from any surface at home.

Popularity: 11% [?]

In-situ oil burning is an effective response for oil spill cleanup on the spot. Oil spill cleanup can be accomplished with comparatively lesser manpower and low cost. Though in-situ burning of oil is effectual in oil spill cleanup, this method poses a serious threat to the environment as well as human beings.

In-situ oil burning is also done on water, but it depends greatly on the thickness of the slick, water temperature, wind speed and direction, oil type, and wave amplitude. After in-situ oil burning the residues tend to sink deep into the water system thus paving the way for toxic build up in the water body. Hence, this method doesn’t hold good for cleaning up oil spills in water.

Oil spill removal through in-situ oil burning greatly affects the people in the neighbourhood areas, the soil, the plantations, and the wildlife within the proximity of the oil spill. In-situ oil burning sometimes results in the seepage of oil further deep into the soil and shoreline sediments. It releases particulate pollutants, such as Polycyclic Aromatic Hydrocarbons (PAHs), carbon monoxide, and other toxic gases directly into the atmosphere rendering the air unfavourable for breathing. The response personnel are also at risk due to the intense heat sources used in in-situ burning. So care should be taken while employing in-situ oil burning. Pollution detection equipments to monitor the particulate pollutant levels in the air should be utilized.

The above mentioned considerations have to be made in using in situ oil burning as the cleanup strategy. Taking into consideration all the drawbacks of in-situ burning, use of eco-friendly oil cleaners, such as Oil Gone Easy S-200 would be ideal for efficient oil spill containment. As opposed to in-situ burning, this oil spill cleanup procedure is extremely safe as it biodegrades the hydrocarbons present in the oil using the microbes present in the environment.

Popularity: 10% [?]

Fuel oils spills in residential areas can be classified into two types: small oil spills and large oil spills. Small oil spills are usually caused due to leakage in oil tanks or pipes. Large oil spills occur while filling storage oil tanks, due overturning of tanks, or when a basement oil tank overfills. Small scale oil spill cleanup can be done by us. But for large scale oil spills we would definitely need a professional help.

There are some basic oil spill cleanup methods that should be followed by everyone.

• Even small oil spills need to be responded immediately. If left as it is, the spilled oil will seep into cracks and will be very difficult to clean. If the spill is saturated on a concrete or wooden surface, then the only way to clean up the place would be demolition of the place. To avoid this problem, you can try Oil Gone Easy S-200. It is an oil stain remover that removes oil stains from any surface that include concrete, flag stone, brick, pavers, and soil.

• In case of oil spills in your house, first thing to be done is to turn off flame and spark sources. Attempt to clean up the spilled oil by vacuum cleaner should also be avoided.

For small oil spills

• Prevent unnecessary exposure to oil by the use of rubber gloves and shoes. Proper ventilation is also very important to avoid any accidents.

• Use absorbent material over the spill. Dispose the oil spill absorbent carefully in a heavy-duty plastic bag. Use of soap and hot water is recommended to clean up oil on hard surfaces and appliances. Repeat the cleaning if necessary.

For large oil spills

• Report the spill immediately to an oil delivery company or to the Department of Natural Resources (DNR). It is important to inform the fire department for them to check for any explosion hazard. Call a professional clean up service.

• Fuel oil has many toxic substances that cause headaches, nausea, dizziness, and also causes serious health problems in extreme cases.

In any case of oil spill, care should be taken to avoid harmful chemicals which affect the environment as well as animals. Use environmentally friendly products, such as Oil Gone Easy for oil spill cleanup methods.

Popularity: 16% [?]